How to Install Car Amplifier and Subwoofer

What are amplifiers and subwoofers?

If you go to a car show, you can see revamped cars exploding loudly. These cars aren’t just in car speakers and car factory loudspeakers. They depend on how your car stereo is set up to set it apart from the rest, and that’s usually where you need speakers and a subwoofer. As the name suggests, it can amplify the power delivered by the installed head unit and entertainment information system. In general, the higher the volume, the lower the sound quality. So, adding an amplifier will improve the sound quality even when playing at high volume. A subwoofer, on the other hand, is a speaker designed primarily to produce low frequencies or bass. Most cars don’t have a standard subwoofer that can affect the final price. Most standard speakers produce bass, but not as rich as a dedicated subwoofer. Related: Setting up and optimizing your experience Enjoy louder, more comfortable listening in your car. What is a subwoofer and a subwoofer? If you go to a car show, you can see revamped cars exploding loudly. This car will not be shown in car shows with factory speakers. Depending on how you set up your car stereo to separate your car stereo from where you need a woofer and subwoofer, it’s expensive. As the name suggests, it can amplify the power delivered by the installed head unit and entertainment information system. In general, the higher the volume, the lower the sound quality. So, adding an amplifier will improve the sound quality even when playing at high volume. A well-tuned subwoofer and car subwoofer can also help, but a subwoofer is primarily a speaker that produces bass or bass. Most cars are not included.

Installing an Amplifier and Subwoofer in a car: Follow 8 steps..

Fortunately, the process for installing a subwoofer and subwoofer in most cars is pretty much the same. If there is a car factory, you can go there. If you have a vehicle over $5 million, we recommend that you contact your car dealer as the panels and cables can be damaged.

Step 1: The first step is to disconnect the positive terminal of the car battery. Dealing with living energy is bad.

Step 2: To avoid static electricity and distortion, be sure to stay at least 3 feet away from the subwoofer. Subwoofers, on the other hand, tend to use larger speakers, so it’s a good idea to place them in your suitcase and luggage space.

Step 3: The power cable must be connected directly to the car battery. The ground wire, on the other hand, can be attached to any metal in the car. If the selected spot has color or color, remove it first to avoid noise and distortion.

Step 4: For optimal performance, the included fuse should be placed close to the battery. The recommended distance is 2 inches. To do this, simply unplug the power cord and connect both ends to the included fuse.

Step 5: It is recommended to cover the power cable with a cable cover to avoid thermal damage to the motor. access wiring Lay out the speaker cable for easy connection and use the position valve to touch the cable. Then use the adapter to connect the cable to the amplifier and connect the RCA.

Step 7: Connect the subwoofer to the amplifier. Adjust the amplifier gain settings to your liking before replacing the panel. If you don’t know the right settings, you can call a friend or someone who combines the sounds to give you the perfect listening experience. Make sure there is no constant noise or distortion.

Step 8: If the sound is nice and rich, you can put the removed panel in the car. Connect the positive ring of the amplifier to the positive lead of the car battery and secure it to the other positive.

Read More: Best cheap car subwoofers Reviews

How to Wire Amps & Subwoofer?

First, disconnect the cable from the negative (-) terminal of the battery under the car hood. This prevents accidental short circuits when installing the amplifier. Mark the area under the cover to which the fuse holder can be attached. Place the fuse as close to the battery as possible to protect it from short circuit only if it is inside a short circuit.

After locating, drill a hole in the fuse holder and secure it with screws. Mark a conventional rubber round clip that easily passes through the point of the car, preferably under the bulkhead and under the hood. The photo on the left shows an example of a conventional rubber ring that allows the vehicle to be accessed under the hood.

When you find this hook, unplug the power cord from inside the vehicle. If that doesn’t work, try attaching the ring a few times with a screwdriver and pushing the power cord back in. Slide the power cable through the ring under the cover and loosen just enough to secure the cable to the fuse holder. You can now insert the fuse into the fuse holder and connect the firewall power cable to the fuse holder. You can also connect a short power strip from the positive battery terminal to the other side of the fuse and run the power cable from the car to the trunk. Usually, the power cable is connected to the side of the driver’s side mat. They are usually assembled with plastic clips that can be easily removed and refilled. The rear seats can be removed for easy access to the trunk. The rear seats are usually secured under each bucket seat with two clamps.

Access CD receivers or stereo heads with RCA outputs and external wiring. Connect the cinch cable to the amplifier output (SUB output) as soon as possible and connect the remote start cable to the RMT or remote cable (usually the blue cable) on the CD head. Run this wire back into the trunk speaker just like the power cord. Route the signal and amplifier cables under the occupants and disconnect them from the power cables to prevent noise from entering the system. Connect the power cable to the + 12V or PWR socket on the amplifier, connect the external power cable to the RMT or remote socket on the amplifier, and connect the cinch connection to the cinch input. Insert the dowel into the trunk where you can connect the loop end of the ground wire. If not, take everything out and find a carpet area you can screw in. Scrape the paint off to ensure a good connection to the ground wire. Then connect the ground wire to the GND or ground connection of the amplifier. Connect the subwoofer to the amplifier using speaker cables. Make sure the positive (+) terminal of the amplifier is connected to the positive (+) terminal of the amplifier. When not connected, the amplifiers are 180 degrees out of phase. Then reconnect the battery negative and make sure the amplifier is on and you can hear audio from the subwoofer. Once you’ve made sure everything is connected, reassemble your car, and enjoy the crash!

What are the benefits of installing an amplifier and subwoofer?

Driving is not limited from A to B. You need to enjoy the whole trip, especially if you are traveling with friends and family. An amplifier and subwoofer are added to provide the vehicle with a rich entertainment system. If you think that adding an amplifier and subwoofer will affect the mileage of your car, you are mistaken. These audio devices use less energy than air conditioners. Fuel consumption is only affected if multiple large speakers are installed in the vehicle, increasing the total weight of the vehicle. But good speakers and subwoofers don’t have to be expensive. The installation process is not that difficult, you just need to install this audio device in your car.

Read More: Best Car Speakers on a Budget |Which one to Buy?

How to install car amplifier and subwoofer: FAQs

How do I connect a subwoofer to amp?

The receiver produces about a quarter of the sound. Increase the subwoofer output to fully amplify the output of other speakers without distorting the subwoofer sound. Increase the volume until distortion, then pause and unmute the audio.

Is it hard to install a subwoofer and amp?

Installing an amplifier in a car is often difficult, depending on the car and the cables that need to be installed or hidden. If you are adding a subwoofer to your factory system, be prepared for the extra work. 

What is the RMS value of 1000 watts?

The numbers you are looking for are RMS preamp wattage and 4-ohm subwoofer wattage. In this case, it’s about 1000 watts RMS, and the SSL site is rated for 1250 RMS.